QMS 3260 Spécifications télécharger pdf (Page 15)

%&#

"

' 

2 Gently lift up the right

paper guide, and slide it to

the desired setting.

3 While pressing down the

gray handle on the rear

media guide, slide it to the

desired width setting.

»Note:

If you’re loading the

same size paper, you don’t

have to adjust the guides.

Make sure the papers stack’s

height does not exceed the

paper limit mark.

4 Align the four corners of

the paper and place the

paper in the tray.

The paper should enter eas-

ily between the guides. Make

sure the paper does not get

bent upwards by the guides.

»Note:

Make sure the guide

stopper is locked firmly in the

guide hole on the bottom of

the tray. Adjust the guide to

the paper size correctly;

otherwise, paper jams can

occur.

5 Insert a correct paper size

label into the paper size slot on the tray, then push the tray all the way back

into the printer until it latches.

»Note:

The top sheet in the tray will be the first sheet printed for your job.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 193 194

Pas de commentaire

QMS 3260 Spécifications Page 15