QMS PS 410 Guide de l'utilisateur télécharger pdf (Page 131)

cartridge out and roll it from side to side. This procedure is

described in chapter 2, “Printer Use,” as well as in the

directions that come with the cartridge.

4. If these solutions do not work, contact your QMS vendor.

Not All Pages Are Printed

1. Check your cable. See the section in the Getting Started Guide

on connecting and testing with either a Macintosh or an IBM

PC. You may have the wrong kind of cable.

Unclear Printout

See “Print Quality Problems” at the end of this chapter.

Printer Ejects Blank Pages

1. Check the Active indicator. If the light is on, try sending your

file to the printer again, and if the Active indicator does not

light, check the interface setting. You may not be configured

for the correct cable and port. See the “Connecting the IBM

PC” or “Connecting the Macintosh” in the Getting Started

Guide.

2. There may be a problem with the connection of devices.

Review the section entitled “Connecting the Printer to the

Host” in the Getting Started Guide to be sure you have

properly connected to the printer. You must have the right kind

of cable: null modem serial or parallel for IBM PC or

compatible users, and LocalTalk for Macintosh or networked

users. See Appendix A. These cables may be ordered from

your QMS vendor.

Chapter 7

Troubleshooting Printer Problems 7-15

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 287 288

Pas de commentaire

QMS PS 410 Guide de l'utilisateur Page 131